Tx Frequency |
(Factory Overrides, Tx Synthesizer Reference Divider List) |
Allows you to enter a Tx (Transmit) frequency (in MHz) for the respective Tx Synthesizer Reference Divider frequency value. This selection applies for the current record / row which applies on a radio-wide basis.
|
This field should not be enabled unless deemed necessary. Procedures to enter factory override information in the Factory Overrides menu should only be attempted by Qualified Service Personnel. Failure to perform procedures properly may seriously degrade the radio and/or system performance. |
|
6.25 kHz step size for the 800 MHz frequency band: Starting with Release R09.01.00, the CPS allows a 6.25 kHz step size for Conventional frequencies in the 800 MHz frequency band, to meet regulatory compliance in certain (non-FCC) countries; however, be aware that two radios operating on adjacent channels separated by 6.25 kHz only may experience an undesirable crosstalk phenomena. |
|
Duplicate frequencies are not allowed. Therefore, when selecting a frequency, if a frequency has already been entered into the list, then that frequency will no longer be a valid choice for the current field. |
|
Refer to the Motorola Catalog Sheets / Price Pages or Manual for valid Frequencies for the current model. |
|
For optimal performance, the frequencies should be entered in ascending order. |
When the Factory Overrides Enable field is "Enabled", and
when the radio is model / option capable.
This is an advanced
setting which is only
available in Expert View (see Codeplug
View).
